Pipe Markers
Grainger Pipe Marker 150# Steam 5 in H 8 in W
The Brady 150 Steam Pipe Marker is a self-adhesive vinyl pipe marker that identifies steam pipes. It has a white background with black text that reads "STEAM" in 1.5 inch tall letters. The marker has an operating temperature range of -40°F to 176°F and is made from flexible, conformable vinyl that resists UV light and chemicals. It meets ANSI A13.1 and NFPA 99 standards for pipe marking and has an expected outdoor life of 5 years. The marker comes in a convenient roll format that is 6 inches wide by 150 feet long for efficient application.
Grainger Pipe Markr Boiler Blowdown 26in H 12in W
The Brady Pipe Marker for Boiler Feed Water is a self-adhesive vinyl pipe marker that identifies boiler feed water pipes. It has a white background with black text that reads "BOILER FEED WATER" in 1-1/2 inch tall letters. This pipe marker meets ANSI standards for pipe marking and has a temperature range of -40°F to 176°F. It has an outdoor durability of 5 years. The pipe marker comes in rolls that are 1-1/2 inches wide x 50 feet long. It can be applied on pipes up to 2 inches in diameter. This product helps identify boiler feed water pipes for safety and compliance.
Grainger Pipe Marker Air 9 in H 8 in W
The Grainger 14H750 is an American Lock A700 Series solid brass body padlock with a 1-9/16" wide brass body and a 1-1/4" hardened steel shackle. It features 5 pin tumbler security with stainless steel ball bearings and a double locking mechanism for pick and drill resistance. This padlock has a brass finish and comes with two nickel silver keys. It is ideal for securing gates, storage units, equipment, tool boxes, and more. The A700 padlock series is rated for indoor and outdoor use.
Grainger Pipe 4 in Unthreaded Push-Fit SS
The Grainger 14N957 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a 1.15 service factor, thermally protected, manual reset overload protector, and meets NEMA design B standards. This motor can be used for various industrial applications requiring 3/4 HP at 1725 RPM. With its ball bearings and thermally protected design, it provides reliable operation. The open drip proof enclosure allows use in dirty or dusty environments. Overall, this is a versatile 3/4 HP electric motor suitable for industrial, commercial, and agricultural applications.
Grainger Pipe 4 in Unthreaded Push-Fit SS
The Grainger 14N956 is a Westward brand 1/4-inch drive socket set. This 108-piece socket set includes both SAE and metric sockets ranging from 1/4 inch drive to 3/4 inch drive. The set comes organized in a sturdy plastic case for convenient storage and portability. Key features of this socket set include the chrome vanadium steel construction for durability and longevity, a knurled design on the tools for grip, and a comprehensive assortment of the most commonly used socket sizes for automotive and machinery repairs and maintenance. This professional-grade socket set provides users with the essential tools needed for a wide variety of fastening and repair jobs.
Grainger Pipe Mrkr Fire Prtction Watr 5in H 8in W
The Grainger 14H847 is a 14-inch diameter, high-speed steel hole saw designed for cutting holes in wood, plastic, and light metals. It features bi-metal construction with M42 high-speed steel teeth brazed to a carbon steel body for durability and long life. The 14H847 has a 1-1/8-inch arbor hole and comes with a pilot bit for guiding the hole saw. Recommended operating speed is up to 2500 RPM with proper lubrication. Overall length is 4-1/2 inches.
Grainger Pipe Markr Fuel Oil Supply 26in H 12in W
The Grainger Approved Pipe Marker for Fuel Oil is a self-adhesive vinyl label designed for identifying fuel oil pipes. It has black text reading "FUEL OIL" on a yellow background. The marker measures 4" high x 12" long and is made from flexible, conformable vinyl that resists UV rays, abrasion, moisture, chemicals, and extreme temperatures. It can be applied to pipes up to 2" in diameter and has an operating temperature range of -40°F to 200°F. The adhesive backing allows for quick stick application and the vinyl material is durable for long-lasting pipe identification. This pipe marker meets ANSI/OSHA requirements for pipe labeling.
Grainger Adapter SS 2 x 1 1/2 in Pipe Size Socket
The Grainger 14P008 is a 14-inch diameter, 8-inch long, cast iron pulley with a 1-1/8 inch bore and keyway. It has a double V-groove for use with multiple v-belts and is rated for up to 15 horsepower at 1725 RPM. The pulley is made of durable cast iron with a black oxide finish to resist corrosion. With its versatile sizing, keyway, and v-groove design, this pulley can be used for a variety of power transmission applications.
Grainger Pipe Marker Oxygen 4 in H 24 in W
The Brady Pipe Marker for Oxygen is a self-adhesive vinyl pipe marker designed for identifying oxygen gas lines. It has a bright green background with the word "OXYGEN" printed in black lettering. The marker is 6" tall x 24" long and made from durable vinyl that is weather, UV, chemical, and abrasion resistant. It has an aggressive permanent adhesive that bonds to pipes and most surfaces. This pipe marker meets ANSI/OSHA requirements for labeling oxygen gas piping systems. It provides clear hazard communication and identification for improved safety.
Grainger Pipe Marker Heating Supply 26in H 12in W
The Brady 14H877 Pipe Marker for Heating Supply is a self-adhesive vinyl pipe marker that identifies heating supply pipes. It has a legend that reads "Heating Supply" in black text on a yellow background. The marker has an inner diameter range of 1-1/4" to 2" and is 5" long. It is made from flexible, conformable vinyl with a permanent acrylic adhesive that adheres to pipes, valves, fittings and other irregular surfaces. This pipe marker meets ANSI A13.1 and NFPA 99 standards for pipe marking and helps identify heating supply pipes for safety and maintenance. The marker comes in a pack of 25.
Grainger Pipe Mrkr Sdium Hypochlrte 26in H 12in W
The Brady Pipe Marker for Sodium Hypochlorite is a pre-printed pipe marker that identifies pipes containing sodium hypochlorite. It is made of vinyl cloth with a permanent acrylic adhesive backing. The marker measures 5" wide x 8" tall. It features the text "Sodium Hypochlorite" in black lettering on a yellow background. The marker meets ANSI/OSHA requirements for pipe marking and has a temperature range of -40°F to 200°F. It can be applied to pipes up to 2" in diameter. The adhesive backing allows for quick and easy application. This pipe marker from Brady helps identify sodium hypochlorite piping systems to promote safety.
Grainger Pipe Marker Condenser Water Return 9in H
The Grainger Approved Pipe Marker for Condenser Water is a self-adhesive vinyl pipe marker that identifies condenser water pipes. It has a blue background with white text that reads "Condenser Water". The marker measures 1-1/2" wide x 9" long and is made of durable vinyl that resists abrasion, moisture, and chemicals. It has an easy peel and stick application and can withstand temperatures from -40°F to 200°F. This pipe marker helps identify condenser water pipes for safety and compliance. It meets ANSI/OSHA requirements for pipe marking in industrial facilities.
Grainger Pipe Marker Compressed Air 5 in H 8 in W
The Brady Pipe Marker for Compressed Air is a self-adhesive vinyl pipe marker that identifies compressed air lines. It has a legend that reads "Compressed Air" in black text on a yellow background. The marker measures 1-1/2" W x 9" L and is made from 6 mil flexible vinyl. It has an acrylic adhesive that adheres to pipes, hoses, valves and fittings. It is suitable for indoor and outdoor use and resists UV rays, abrasion, moisture and chemicals. The marker meets ANSI/OSHA requirements for pipe marking and labeling. It comes in a pack of 10 markers. The Brady Pipe Markers provide quick, easy identification for compressed air lines.
Grainger Pipe Marker 9 in H 8 in W
The Brady Pipe Marker is a 9 inch high by 8 inch wide pipe marker made of durable vinyl with a permanent adhesive backing. It is designed for identifying pipes up to 8 inches in diameter and has a high performance acrylic adhesive that bonds instantly. This pipe marker meets ANSI standards for pipe marking and identification. It comes in white with black text for maximum contrast.
Grainger Pipe Mrkr Chilld Water Retrn 9in H 8in W
The Brady Pipe Marker for Chilled Water is a self-adhesive vinyl pipe marker that identifies pipes carrying chilled water. It has a blue background with white text reading "CHILLED WATER" and has an operating temperature range of -40°F to 200°F. The marker measures 1.5" height x 9" width and has an adhesive backing for easy application. It is made from flexible, conformable vinyl that resists UV light, abrasion, and chemicals. This pipe marker from Brady helps identify chilled water pipes for safety and compliance.